DIG low-flow, 360° Fogger/misters with 1/4 inch barb or 10/32 thread operate at a minimum pressure of 30 PSI to produce micro-sized droplets in a small diameter area when mounted above the plant. Higher incoming pressure results in smaller and finer droplet size. The .8 GPH fogger’s vortex design spins the incoming water into a fine mist, useful where overhead misting or cooling is desired, or for plants that require constant moisture. DIG Fogger/misters are ideal for misting and humidifying in pots, hanging baskets, and planters as well as hanging above for cooling effect. 1/4 inch barb or 10/32 thread allows for a quick and easy connection to 1/4 inch micro or 1/2 inch poly tubing. The fogger/misters are available in two models, part # 8825BB with a 1/4 inch barb (pack of 5), and part # 8810BB with 10/32 thread (pack of 5) allowing for installation flexibility with any size tubing.

Low flow with small droplets in a fine mist with a 360° pattern and approximately 70° trajectory
Color-coded nozzles are easy to open, clean, and replace
Three-parts construction with O-ring for a tight seal
Constructed of UV-resistant, durable plastic material

Specifications

Operating pressure range	35 to 80 PSI
Flow rate	.85 GPH @ 50 PSI
Pattern	360°
Trajectory angle	approximately 70°
Connection	1/4-In barb
Average droplet size	50 micron
Filter requirement	minimum of 200 mesh
Recommended spacing	2-Ft to 3-Ft apart
Body and cover	Polyester
Nozzles	Acetal
O-ring	Buna-N

Similar Products

DIG 360° Pattern Fogger/Mister, 1.3-Ft, 1/4-In Barb, 5-Pk

{{title}}