The Saturn III gear-drive rotor is engineered specifically to water landscape areas which require a throw distance of up to 25 feet between sprinkler heads. Its arc is adjustable from 40 to 360 degrees in precise increments, which gives you the ability to aim it so that the water hits the landscape only and avoids any hardscape surfaces. The 4-inch pop-up riser height ensures that the nozzle clears tall grass. It comes with a pre-installed 2-gallon-per-minute (GPM) nozzle which results in a full-pattern precipitation rate of 0.30 inch per hour at 25-feet square spacing at 40 PSI. This very low rate reduces the risk of runoff or puddling for many soil types and conditions.

It includes a radius adjustment screw which allows you to reduce the rotor throw down to 75% of its rated distance. It also includes a bottom inlet filter which helps prevent clogging of the nozzle. The can and riser stem are made from high impact ABS and metal components are made from stainless steel.

Adjustment of both the radius and arc requires a standard slotted screwdriver. The inlet is 1/2-inch female pipe thread (FPT). The state-of-the-art approach to mounting a Saturn III is on a 1/2-inch male pipe thread (MPT) Blu-Lock combination swing joint, although it is compatible with 1/2-inch MPT Funny Pipe fittings, swing fittings and risers. The Saturn III replaces rotors from Orbit, Hydro-Rain, and other major brands. Recommended operating pressure is 40 PSI. For outdoor irrigation use with cold water only.

Radius is adjustable down to 75% of maximum distance
Bottom inlet filter helps prevent clogging of the nozzle in dirty water
Compatible with rotors from Orbit, Hydro-Rain, and other major brands
Control with a B-hyve smart controller for optimum water conservation

Similar Products

Orbit Saturn III 4-In Pop-Up 40°-360° Pattern Gear-Drive Rotor Sprinkler, 25-Ft

{{title}}